Fuser Error 50.5
The system returned: (22) Invalid argument The remote host or network may be down. Reseat or replace the fuser cable assembly. 3. If a duplexer is installed, remove it from the back of the printer. Glad I could help. check over here
You can only upload files of type PNG, JPG, or JPEG. By the time you get that "50.5" error you opened the box and installed the fuser in the wrong printer. If the part number on the fuser is the exact same as the one you removed, try powering off the printer and unplugging it from the power source for a few This opportunity shouldn't exist with the P4014 / P4015/ P4515 range because they all use the same fuser. http://www.printertechs.com/printer-troubleshooting/367-50-5-error-on-laserjet-4200-4240-4250-4300-4350
Ask a question usually answered in minutes! Once you have the fuser out, check the fuser's barcode label for the part # and see if the part # matches with your model printer. Steps for cold reset here: https://www.laserquipt.com/support/idx/0/121/article/Cold-Reset-Steps-for-HP-Printers-.html 0 LVL 27 Overall: Level 27 Printers and Scanners 13 Message Expert Comment by:michko2007-12-13 Comment Utility Permalink(# a20464983) Oh, yes, forgot to add, if You can only upload a photo or a video.
Maintenance Kit should installed every 350,000 pages (C3914-69001). The only other explanation might be that the connectors aren't mating properly. Open the top cover door, and remove 2 screw 3. https://www.orionmarket.com/product_error/13786/HP/HP-CP6015/50.5-fuser-error/ If the incorrect fuser goes in, you can get a 50.5 error (or a 13.20 error in some cases) when you power on the printer.
Solution: 1. The square opening at the upper rear corner on the right side plastic panel is the engine test access. 1. Power Supply Removal in the HP 8100 and 8150 AC Access Cover 1. Replace the cable or fuser if the connector is damaged. 2.
Reinstall the fuser. http://h30434.www3.hp.com/t5/Inkjet-Printing/50-5-Fuser-Error-with-new-fuser-installed/td-p/1385475 socalprinterservices Ad by a US maintenance company using the error codes as an attractor but giving no information In practice there were just a couple of pages of scarcely relevant stuff Replace Fusing Assembly 3. Replace DC Controller 4. Other fuser errors are: 50.1 50.2 50.3 50.4 50.6 50.7 50.8 50.9 50.5: Faulty Fuser. 50.5 Inconsistent fuser (verify voltage model) This is usually a nice clear problem, you just
I'm sure it has backlinks, it will once have been best of breed. http://laptopcomputerszone.com/fuser-error/fuser-error-50-8.html Replace power supply To schedule a service appointment: Titanium Print Solutions Customer Care (888) 380-8847 To schedule a service appointment online. Rare, but it does happen. After verifying the problem is related to the AC power supply, check the fuser for common wear and tear in case the fuser also needs to be replaced.
Fuser Error Code 50.1: Low fuser temperature 50.2: Fuser warm-up service 50.3: High fuser temperature 50.4: Faulty fuser 50.5: Inconsistent fuser (verify voltage model) Service Manual Recommended Action Turn the printer If the error continues: 1. Add your answer Source Submit Cancel Report Abuse I think this question violates the Community Guidelines Chat or rant, adult content, spam, insulting other members,show more I think this question violates this content Verify fuser part number with proper HP Printer model. 3. Verify that the correct voltage fuser is installed.. 4. Replace Fusing Assembly with correct fuser assembly. 50.6 Fuser Error Description: open fuser circuit Solution:
Reply 0 0 Picardje Professor Posts: 1,757 Member Since: 07-15-2009 Message 4 of 5 (2,139 Views) Report Inappropriate Content Re: 50.5 Fuser Error with new fuser installed Options Mark as New Now prove that the printer could not have damaged the fuser (mostly, they don't but they could); that you didn't mishandle it and that it is correctly re-packed in an unmarked Suppliers try to be helpful but these parts aren't hugely profitable to us (they may be to HP) so none of us in the spares community can write things like fusers
In the To field, type your recipient's fax number @efaxsend.com.
We do try to help; but there is a substantial cost to us in dealing with the problem so there will be a re-stocking charge. If you don't know how to remove the fuser from your printer,it's not difficult -- see the removal instructions farther down the page. See Fuser on page 233. Useful site though.
Reinstall the fuser. Low Voltage Power Supply 1. Push the fuser firmly--listen for the sound of both blue levers clicking into place. have a peek at these guys Odds are higher of a bad fuser if it was a remanufactured.
On the barcode you will find an HP part #, check the part# on your fuser to see if it matches in the list below. You can only upload a photo (png, jpg, jpeg) or a video (3gp, 3gpp, mp4, mov, avi, mpg, mpeg, rm). Turn Printer off then turn back on.. 2. Subscribe to our monthly newsletter for tech news and trends Membership How it Works Gigs Live Careers Plans and Pricing For Business Become an Expert Resource Center About Us Who We